Anhui Xoanons Chemical Co.,Ltd.

Anhui Xoanons Chemical Co., Ltd.

PRODUCTS

XOANONS®Additive

Surfactant
Polyacrylate leveling agent
Fluorocarbon modified polyacrylate leveling agent
Fluorine surfactant
Polyether modified silicon leveling agent
Reactive silicon additive with acrylic functional group
Substrate wetting agent
Anti-graffiti additive
Performance enhancer
Dispersant
Defoamer

JIAZHI® Easy-cleaning functional resin

Anti-graffiti and Anti-adhesive Resin for municipal engineering paint
Anti-pollution and rain-resistant resin for protective film of paint
Easy-cleaning resin for industrial paint
Anti-icing resin
Anti-graffiti resin for automotive leather and sofa leather
Anhui Xoanons Chemical Co.,Ltd.

PRODUCTS

JIAZHI® JZ-9540-10

Model number

JIAZHI®JZ-9540-10

Specification

Composition     

Silicon modified hydroxyl acrylic resin solution

Appearance      

Slight yellowish to yellowish liquid

Solvent            

BAC/ PMA

Content

50±3%(140℃ 2h)

Viscosity        

100-1000mPa·s
(Rotating viscometer)(25±0.2)℃

Hydroxyl value

127±5 mg KOH/g
(Theoretical value of solid resin)

 

Note: This datasheet is intended to give typical results, not standard。Subject to COA。

 

Application system

Solvent-based

Properties

● Increase slip. Improve hydrophobicity and oleophobicity.

● Provide anti-marker wiping performance.

● Provide lotus effect。

● Excellent flexibility 。

● Excellent hot-healing and self-repairing function

● Water contact angle >100°

● Excellent weather resistance.

Storage stability

Keep intact 36 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.

Recommended formula
1. Suggestion for PU varnish formulation 

 

Material

Dosage%

Part A

JZ-9540-10

76。0

PMA

22。74

Dryer(1%)

1.0

WE-D8920BR(leveling agent)

0.25

WE-D980(defoamer)

0.01

Total

100

Part B

N3390

19。4

Note:

1。Usage recommendation for defoamer

Add WE-D980 with 0.01% to PU varnish and no affecting of compatibility.

Can increase the addition to 0.1% of WE-D980 to color paint.

2.NCO% of N3390=19.6, produced by Covestro, Germany.
3.The mixed part A and B should be used up within 5-7 hours in a sealed container. Otherwise, the mixed material will be gelled.
4.Suggest dry it at 80℃ for 1h or 150℃ for 5min. For automotive protective film, 110-130℃ for 2-3min, ripening at 60-80℃ for 24h.

Package

25KG / 180KG

 

Go
Top

湖北快3走势 吉吉彩票注册开户投注平台 江苏快3平台 宏运彩票注册开户投注平台 九亿九彩票注册开户投注平台 鸿途彩票注册开户投注平台 喜盈盈彩票开户 好运彩票注册开户投注平台 立鼎彩票注册开户投注平台 吉吉彩票注册开户投注平台