Anhui Xoanons Chemical Co.,Ltd.

Anhui Xoanons Chemical Co., Ltd.

PRODUCTS

XOANONS®Additive

Surfactant
Polyacrylate leveling agent
Fluorocarbon modified polyacrylate leveling agent
Fluorine surfactant
Polyether modified silicon leveling agent
Reactive silicon additive with acrylic functional group
Substrate wetting agent
Anti-graffiti additive
Performance enhancer
Dispersant
Defoamer

JIAZHI® Easy-cleaning functional resin

Anti-graffiti and Anti-adhesive Resin for municipal engineering paint
Anti-pollution and rain-resistant resin for protective film of paint
Easy-cleaning resin for industrial paint
Anti-icing resin
Anti-graffiti resin for automotive leather and sofa leather
Anhui Xoanons Chemical Co.,Ltd.

PRODUCTS

JIAZHI® JZ-9540

Model number
JIAZHI®JZ-9540

Specification
Composition: Silicone modified hydroxyl acrylic resin solution
Appearance: Slight yellowish to yellow clear liquid
Solvent: BAC/PMA
Content: 50±3%(140℃ 2h)
Density: 0.98-1.02g/ml(25±1)℃
Viscosity: 100-1000mPa·s
(Rotating viscometer)(25±0.2)℃
Hydroxyl value: 120±5 mg KOH/g
(Theoretical value of solid resin)
Note: This datasheet is intended to give typical results, not
standard.Subject to COA.

Application system
Solvent-based system
Properties
Increase slip. Improve hydrophobicity and oleophobicity.
Provide anti-marker wiping performance.
Provide lotus effect.
Compared with anti-graffiti additive, better easy-to-clean effect and alcohol-resistant wiping performance.
Water contact angle>100°

Storage stability
Store in a cool, dry place in the unopened original packaging for 36 months. Products that exceed the storage period can continue to be used after passing the inspection. It must be closed immediately after use.

Recommended formula
1. Suggestion for PU varnish formulation

 

Material

Dosage%

Part A

JZ-9540

76

PMA

22。74

Dryer(1%)

1

WE-D8920BR(leveling agent)

0.25

WE-D980(defoamer)

0.01

Total

100

Part B

N3390

18

Note:
1. Usage recommendation for defoamer
Add WE-D980 with 0.01% to PU varnish and no affecting of compatibility.
Can increase the addition to 0.1% of WE-D980 to color paint.
2. NCO% of N3390=19.6, produced by Covestro, Germany.
3.The mixed part A and B should be used up within 5-7 hours in a sealed container. Otherwise, the mixed material will be gelled.
4.Suggest dry it at 110-130℃ for 2-3min. for automotive protective film, ripening at 60-80℃ more than 24h. Dry it at 80℃ for 1h, or 150 ℃ for 5h for other industrial coatings. The advantages and disadvantages of fouling resistance and aging resistance depend on whether the coating is fully cross-linked; it is an effective method to put the surface treated film into the ripening box. It takes at least 24 hours during ripening, and the effect is better if it can reach more than 48 hours.
2. Suggestion for baking system formulation

Material

Dosage

JZ-9540

50

Butylated amino resin

10

Solvent

38.5

Adhesion promoter

1

Acid catalyst

0。5

Total

100

1. The amino resin used in this formulation is SANMU 582, which can be adjusted according to specific requirements.
2. Recommended baking temperature: 150 ° C for 30 minutes or 210 ° C for 90 seconds.

Package
25KG / 180KG

Application suggestion for paint protective film

item

TPH film base

TPU film base

fouling-resistance from dry wiping

a little residue

a little residue

fouling-resistance from alcohol wiping

a little slight residue

a little slight residue

hydrophobicity

water contact angle>100°

water contact angle>100°

flexibility

elongation>80%

elongation>50%

recovery

hot healing

hot healing

chemical resistance
(Carburetor-resistance cleaner)

No changes in 30s

No loss of gloss in 30s

weather resistance

aging test of QUVB 1000h

aging test of QUVB 1000h

Instructions:
1. Baking conditions :110-130℃ 3min
Maturation conditions: 80 ℃ 48h
Coating thickness: TPH base 8-10μm TPU base 15-20μm
In view of the variability of substrate, film thickness, baking and aging conditions, the data provided in this table are for reference only.

2。 Oil pen is used for pollution resistance test。 The test method is to write on the film and place the film at room temperature for 3 min

3. The brand of carburetor cleaner used in chemical resistance test is Bontny.

Go
Top

好彩投彩票注册开户投注平台 红韵彩票注册开户投注平台 人人发彩票注册开户投注平台 9号棋牌APP 玖壹彩票注册开户投注平台 乐天彩票注册开户投注平台 好运彩票注册开户投注平台 七天彩票注册 众合彩票注册开户投注平台 上海时时乐